Elastomer solid rod S68 - 80 Shore A - DIN 9835 / ISO 10069
The S68 elastomer solid rod can be cutted to any length to create springs or other elastomer elements. As a spring they are use in press tools to hold the sheet during the lowering phase.
![](/_next/image?url=https%3A%2F%2Fapi.amdl-eu.com%2Fuploads%2Fmedia%2Felastomer-solid-rod-s68-80-shore-a-din-9835-iso-10069.png&w=1920&q=75)
![](/_next/image?url=%2Fimages%2Ficons%2Fressorts.png&w=3840&q=75)
Specifications
Material : 80 Shore A - Urelast
Standard : NF ISO 10069 / DIN 9835
Dimensions :
- Diameter : from 16 to 125mm
- Length : from 300 to 400mm
Load : From 100 to 7000 daN depending on the diameter and the length
Resistance : Elastomer springs do not break. Very resistant to abrasion
Preload : The preload must be greater than the compression settlement (5-7%)
Maximum compression : 35% of the total length
Modulus of elasticity : 25 N/mm^2 at room temperature
Operating temperature : -20°C to +80°C
Benefits :
- Easy to install
- Does not break or generate waste, preventing damage to the tool.
- Reduced noise
- Maintenance-free
- Able to withstand heavy loads
Tolérance :
- Depending on the diameter ±0,25 to ±1,3mm
- Depending on the length ±0,4 to ±2mm
Recommendation for use :
Mounting : The spring is individually fitted between the stripper plate and the top plate thanks to shoulder screw or guiding shafts and washers. The elastomer spring expands when compressed, so a sufficiently large housing is required.
Use conditions :The preload is mandatory and ensures immediate force.
Storage : Store out of direct sunlight and in an environment where humidity does not exceed 65%.
To order you need to indicate :
- The diameter
- The lenght
Example : S68.032.300
Technical data
3D Model
Plan
D : Diamètre
L : Longueur totale
![Schéma S68/S69](/_next/image?url=https%3A%2F%2Fapi.amdl-eu.com%2Fuploads%2Fmedia%2Fs68-40e936c1.png&w=640&q=75)