Self-lubricating guide bush flat BG01 - DIN ISO 2768 medium

Material: Bronze and graphite

Standard : DIN ISO 2768 medium

Dimensions :

• External diameter : from 12 to 180mm
• Internal diameter : from 8 to 160mm
• Length : from 8 to 150mm

Working speed : 0 to 30m/min

Up to 200 strokes per minute

Type of mounting : Clamps and screws. The fixing elements are not supplied with the bushe.

Type of lubrification : Self-lubricating

Sliding direction : Vertical and rotation. For further informations, please refer to the plan.

Benefits :

• High working speed thanks to the bronze inserting due to its low coefficient of friction.
• Flat
• Self-lubricating

Conception : Modular design for an easy integration and simplified maintenance.

• Machining 
• Grinding / honing

Target application :

Ideal for press tools, injection moulds or any other assembly requiring precise, reliable guidance.

Recommendation for use :

• Mounting : The straight sleeve bushes are glued into the plate

1.Degrease with acetone or a similar solvant and thoroughly wipe clean

the outer surface of the straight sleeve bush and the inside of the plate bore.

2. Apply a thin layer of Loctite 601 glue to both surfaces.

3. Insert the bush into the hole while turning.

4. Leave to set for the required amount of time (e.g. 4 hours at 22°C)

• Do not exceed working speed. Compliance with working speeds ensures the integrity of the tool and bushe. 
• Environment : Do not store or use the bushe in a corrosive environment.

Maintenance recommendations :

Each of our guide bushes can be made to special dimensions. Please do not hesitate to send us your specific requests, indicating the dimensions and specifications required.

To order you need to indicate : 

• The desired dimensions
• The quantity

Example : BG01.008.012.008 X2