Self-lubricating Sliding pad PLP02 - VDI 3357

Material : Bronze and graphite

Standard : VDI 3357

Dimensions :

• Width : from 50 to 160mm
• Thickness : 20mm
• Length : 50 to 500mm

Working speed : <0.5m/s

Number of shapes : The PLP02 are available in 5 different shapes. For further informations, please refer to the plan.

Hardness : 190 - 220 HBW 10/3000

Sliding direction : Horizontal and vertical. For further informations, please refer to the plan.

Surface area with solid lubricant : 20 - 25%

Max surface pressure :

• 50N/mm^2 static
• 35N/mm^2 dynamic

Max temperature : 150°C

Lubrication : Self-lubricating

Benefits :

• High wear resistance
• Self-lubricanting - Maintenance free
• High heat resistance
• Shock absorption
• High impact resistance
• Chamfered plate
• Improved precision

Recommendation for use :

• Mounting : Wear plates are fastened directly in the tool using screws. They should be lubricated only once after assembly and after each cleaning operation.
• Respecting working speeds : Respecting working speeds ensures the integrity of the tool and the guide bar. Be careful, an additional lubrication is recommended when operating at speeds higher than 0.5m/s.
• Observe working direction : The working direction of the sliding pad is shown on the plan. Please observe this to ensure the system integrity.

Maintenance recommendations :

• Regular cleaning
• Regular inspection
• Load control

Special dimensions :

Each of our wear plates can be made to special dimensions. Please do not hesitate to send us your specific requests, indicating the dimensions and specifications required.

To order you need to indicate : 

• The desired dimensions
• The quantity

Example : PLP02.050.080 x2