Self-lubricating steel sliding pad with sinterlayer PLP12 - VDI 3357
Self-lubricating steel sliding pad with sinterlayer PLP12 - VDI 3357
Self-lubricating steel sliding pad with sinterlayer PLP12 are used to reduce wear on surfaces subject to high abrasion due to constant movement between two surfaces/parts. They are often used in mold and press tooling to increase tool life by reducing wear on moving components.
Specifications
Material : Steel with sinterlayer
Standard : VDI 3357
Dimensions :
- Width : from 50 to 160mm
- Thickness : 20mm
- Length : 80 to 315 mm
Working speed : <1m/s
Number of shapes : The PLP12 are available in 4 different shapes. For further informations, please refer to the plan.
Hardness : 230 HBW 10/3000
Sliding direction : Any directions
Surface area with solid lubricant : 15 - 20%
Max surface pressure :
- 120N/mm^2 static
- 70N/mm^2 dynamic
Max temperature : 150°C
Lubrication : Self-lubricating
Benefits :
- High wear resistance
- Self-lubricanting - Maintenance free
- High heat resistance
- Chamfered plate
- Improved precision
Recommendation for use :
- Mounting : Wear plates are fastened directly in the tool using screws. They should be lubricated only once after assembly and after each cleaning operation.
- Respecting working speeds : Respecting working speeds ensures the integrity of the tool and the guide bar. Be careful, an additional lubrication is recommended when operating at speeds higher than 1m/s.
Maintenance recommendations :
- Regular cleaning
- Regular inspection
- Load control
Special dimensions :
Each of our wear plates can be made to special dimensions. Please do not hesitate to send us your specific requests, indicating the dimensions and specifications required.
To order you need to indicate :
- The desired dimensions
- The quantity
Example : PLP12.050.080 x2
Plan
