Self-lubricating T-Guide bar PLL01
Self-lubricating T-Guide bar PLL01 are used to reduce wear on surfaces subject to high abrasion due to constant movement between two surfaces/parts. They are often used in mold and press tooling to increase tool life by reducing wear on moving components.
Specifications
Material : Bronze and graphite
Dimensions :
- Width : from 18 to 28mm
- Thickness : from 12 to 35mm
- Length : 350mm
Working speed : <0.5m/s
Hardness : 190 - 220 HBW 10/3000
Sliding direction : Horizontal. For further informations, please refer to the plan.
Surface area with solid lubricant : 20 - 25%
Max surface pressure :
- 50N/mm^2 static
- 35N/mm^2 dynamic
Max temperature : 150°C
Lubrication : Self-lubricating
Benefits :
- High wear resistance
- Self-lubricanting - Maintenance free
- High heat resistance
- Shock absorption
- High impact resistance
- Chamfered plate
- Improved precision
Recommendation for use :
- Mounting : T-guide bar are fitted in a special housing. They should be lubricated only once after assembly and after each cleaning operation.
- Respecting working speeds : Respecting working speeds ensures the integrity of the tool and the guide bar. Be careful, an additional lubrication is recommended when operating at speeds higher than 0.5m/s.
- Observe working direction : The working direction of the guide bar is shown on the plan. Please observe this to ensure the system integrity.
Maintenance recommendations :
- Regular cleaning
- Regular inspection
- Load control
Special dimensions :
Each of our wear plates can be made to special dimensions. Please do not hesitate to send us your specific requests, indicating the dimensions and specifications required.
To order you need to indicate :
- The desired dimensions
- The quantity
Example : PLL01.012.018.350 x2
Plan
L : Length
B : Width
A : Thickness
